Water Heater Installation in Rogers, AR
Tell us about the house, and a licensed contractor who covers Benton County will get in touch.
Tell us about the job
It takes about a minute.
What a new water heater needs to handle in Rogers
Winter nights here average 28°F from December through February, and homes run their heat October through April, seven months of the year. Cold like that puts real demand on a water heater during exactly the months it also has to work hardest.
Benton County has seen 14 winter storms and 152 damaging wind events over the past ten years, and in 2024, 24% of Arkansas households lost power for at least 24 hours. A gas water heater with a standing pilot keeps working through an outage. One with electronic ignition, gas or electric, comes back on by itself once power returns. Whichever type you install, it has to meet the federal minimum efficiency set for its tank size, since that minimum is scaled to the gallons the tank holds.
- 28°F
- the average winter night, and colder incoming water means longer heating
- 7 months
- October through April, the months homes here need heat
- 24%
- of Arkansas households lost power for a day or more in 2024, and a heater with an electric element or electric ignition stops without it
NOAA nClimDiv, 1991–2020 normals
- How do I know it's time to replace my water heater?
- The clearest sign is water pooling around the base of the tank. That means the tank itself has started to fail, and once that happens a repair will not fix it. Rusty water from the hot tap, an old unit nearing the end of its rated life, or water that never gets fully hot anymore are the other signs worth paying attention to. If you notice any of these and have not had the unit inspected, it is worth having a licensed contractor look at it before it fails on its own, since a failed tank can mean a flooded floor with no warning.
- Should I switch to a tankless water heater?
- It depends on what you want out of it, not on whether one type is simply better. A tankless unit heats water on demand instead of storing it, so it does not run out of hot water partway through a long shower, and it does not sit there keeping a tank of water hot all day. It usually needs a larger gas line or a dedicated electrical circuit than a tank did, so switching is not a straight swap. A licensed contractor can look at your gas line, venting, and electrical setup and tell you what changing over would actually involve in your house.
- What changes when you install a tankless water heater?
- The biggest change is that hot water no longer runs out. A tank heater stores a fixed amount of hot water and can run cold once that is used up. A tankless unit heats water as it flows through, so it keeps up as long as you run it, though very high demand at once, like two showers and a washing machine running together, can still stretch what it can deliver. It also takes up much less space, since there is no tank to store. On the install side, a tankless unit often needs a bigger gas line, a different vent, or its own electrical circuit, which is why a licensed contractor needs to check what your house already has before the swap.