Dryer Vent Cleaning in Batesville, AR
Tell us about your home, and a licensed contractor who covers Independence County will get in touch.
Tell us about the job
It takes about a minute.
Step 1 of 3: Equipment
Cold vents make lint stick
Your dryer pushes out warm, damp air. Batesville winter nights average 31°F from December through February, and that cold hits the vent from outside while warm air moves through it. The air cools fast, and the moisture in it makes lint cling to the vent walls instead of blowing out the hood.
Over a season that runs seven months, October through April, that buildup narrows the vent a little at a time. A narrow vent means the dryer takes longer to dry a load and pushes more heat and moisture back into the house instead of outside.
- 31°F
- the average winter night, and cold vents catch damp lint
- 7 months
- October through April, the vent stays cold
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
NOAA nClimDiv, 1991–2020 normals
- How often should a dryer vent be cleaned?
- A yearly cleaning is what most manufacturers call for. Larger households doing more loads a week will fill the vent with lint faster, so the dryer works harder and takes longer to dry a full load between cleanings. If your dryer is drying slower than it used to, that is the vent telling you it is due.
- Can I clean my dryer vent myself?
- You can clean the lint trap and the first few feet behind the dryer yourself. The rest of the run, especially where it passes through a wall or up to a roof cap, is harder to reach and easy to damage with the wrong tool. A contractor uses a brush and rod system built for the full length of the vent, including the hood outside where lint tends to build up and block the flap from closing.
- What are the signs of a clogged dryer vent?
- Clothes that stay damp after a full cycle, a dryer that runs hot to the touch, or a burning smell when it's on all point to a blocked vent. Check the outside vent hood too. If the flap barely moves or you don't feel much air coming out while the dryer runs, lint is backing up somewhere in the line.